Damper actuators in connection diagrams for damper actuators for Fans Rosenberg
Damper actuators are used for the opening and lowred of dampers. In the selection of motors the following features should be considered.
24 V AC/DC or 230 V AC
Damper size ( 0.8; 1.5; 3; 3.6; 6m2)
Function (Open/Closed; continuous switch; spring return)
Simple direct mounting on damper shaft with universal clamp. Secured against twisting with supplied twist
lock. Manual positioning with self-resetting push button possible (drive idle as long as button is depressed).
High level of operational safety since the drive cannot be overloaded. It needs no stop switch and stops
automatically on impact. The direction of rotation can be manually changed by a switch.
Attention:
With the use of controllers (RTE/D TR, MSD TR and Airtronic) the following arrangement should be observed!
Airtronic D/Basic:
Intake/outlet air damper =Open/Closed actuator
Mixed air damper =continuous actuator
Bypass damper =continuous actuator
TR control:
Inlet/outlet air damper =Open/Closed actuator
Mixed air damper =continuous actuator
Bypass damper =continuous actuator
Connection diagrams for damper actuators for Fans Rosenberg for position drives
The contact addresses are to be found in the attachment, or else please phone +49 (0)7940 / 0917 186 894 or email to info@rosenberg.com.vn